Printable wall and floor film with minimal shrinkage

No ugly curled edges

Can be removed cleanly, without leaving any glue residues*

DP-4320M-HBR is a 150 micron matte white semi-rigid vinyl film embossed with a canvas pattern. DP-4320M-HBR has a unique and innovative pressure sensitive adhesive that is specially formulated to be both high-tack and removable (HBR).
The combination of vinyl and  adhesive is designed to stick aggressively to most surfaces, but is specially formulated to remove cleanly for up to a year. It’s  also forgiving in the event you touch the adhesive to itself--it will separate cleanly and the adhesive stays anchored to the vinyl.
The backing paper provides excellent stability for processing using solvent, latex and UV curable digital inks common to wide format digital printing systems.

• 150 micron thick
• roll length: 30m
• 5 years indoors
• cleanly removable (up to 12 months, then permanently)
• beautiful fine structure
• can also be used as floor film
• 152cm wide

---

Can I use DP-4320M-HBR on multiple surfaces?
DP-4320M-HBR is designed for wall murals, decals and graphics for most types of smooth painted interior walls. This includes most flat, semigloss and gloss paint finishes. The surface must be smooth and clean
prior to application. If applying to new paint consult the paint manufacturer for proper drying conditions before DP-4320M-HBR application. The adhesive is suitable for glass, tile, OEM painted metal, and most low
surface energy surfaces.

Can I print edge-to-edge with DP-4320M-HBR?
Yes! The adhesive will hold with minimal shrinkage for full bleed graphics without the need for an unprinted border.

When paneling larger jobs, do I use overlaps or butt-seams with this product?
Installation methods vary by both installer and project, but we consider either method to be acceptable, and the thickness and rigidity of DP-4320M-HBR makes it easy to align panels.
Butt seams are preferred, and you can expect minimal shrink with interior applications.
As a benefit of the DP-4320M-HBR product, the adhesive allows for minimal overlap as the High Tack adhesive bonds aggressively to the textured face of the vinyl. If overlapping, we recommend at least 6mm-15mm for
overlapping panels.

* 12 months removable, then permanently bonded