Glasdecor Film X-Cast Etched Glass AirScape -152cm
Item No.XC-1200X-152PE
Finally a good etched-glass film for dry application! Ideal for cut-out figures and small details that need to adhere to the glass. Invisible micro air ducts Nice and smooth face film; prints very well. Stays fully flat in any printer Solvent adhesive Roll size:152cm x 50m XC-1200X EtchedGlass is a
Order in larger quantities,
for a better price.
Price €13.88
price per Meter
excl. tax
In stock
Quantity
Per linear meter
Quantity
Per roll 50 meter
Description
Finally a good etched-glass film for dry application!
Ideal for cut-out figures and small details that need to adhere to the glass.
XC-1200X EtchedGlass is a light-greyish translucent PVC film with the same characteristics and specifications as the ordinary XC-1200 version, except that the adhesive layer has very small air ducts to allow for easier dry application.
Why AirScape™ air ducts
When cut text or figures are transferred onto glass by means of application tape,
this becomes amazingly easy with XC-1200X.
This means the film can be installed dry without creating air bubbles. Small cut details or letters pose no problem. The micro air ducts become invisible after installation.
technical information:
This film is intended for use with digital printers that use eco-solvent-, hardsolvent, UV- and latex inks. The appearance of the film after printing is remarkable; coloured prints which appear to be etched in to the film and will give the glass a great look. This film stays nice and flat on your printer thanks to its moisture-proof liner.
Interesting:
If fast installation with guaranteed strong adhesion is required, we recommend using SOTT 600-Z0314 Right-On application fluid 600-Z0314. This ensures particularly strong adhesion thanks to the special humidifiers; effective after approx. 3 minutes.
Ideal for cut-out figures and small details that need to adhere to the glass.
- Invisible micro air ducts
- Nice and smooth face film; prints very well.
- Stays fully flat in any printer
- Solvent adhesive
- Roll size:152cm x 50m
XC-1200X EtchedGlass is a light-greyish translucent PVC film with the same characteristics and specifications as the ordinary XC-1200 version, except that the adhesive layer has very small air ducts to allow for easier dry application.
Why AirScape™ air ducts
When cut text or figures are transferred onto glass by means of application tape,
this becomes amazingly easy with XC-1200X.
This means the film can be installed dry without creating air bubbles. Small cut details or letters pose no problem. The micro air ducts become invisible after installation.
technical information:
- Thickness: 70 micron
- Polymeric
- Roll length: 50m
- Roll width: 152cm
- Expected life time: 7 years
- Permanent solvent adhesive
- No adhesive residue after removal
This film is intended for use with digital printers that use eco-solvent-, hardsolvent, UV- and latex inks. The appearance of the film after printing is remarkable; coloured prints which appear to be etched in to the film and will give the glass a great look. This film stays nice and flat on your printer thanks to its moisture-proof liner.
Interesting:
If fast installation with guaranteed strong adhesion is required, we recommend using SOTT 600-Z0314 Right-On application fluid 600-Z0314. This ensures particularly strong adhesion thanks to the special humidifiers; effective after approx. 3 minutes.
Glasdecor Film X-Cast Etched Glass AirScape -152cm
Item No.XC-1200X-152PE
Finally a good etched-glass film for dry application! Ideal for cut-out figures and small details that need to adhere to the glass. Invisible micro air ducts Nice and smooth face film; prints very well. Stays fully flat in any printer Solvent adhesive Roll size:152cm x 50m XC-1200X EtchedGlass is a
Price €13.88
price per Meter
excl. tax
Order in larger quantities,
for a better price.
In stock
Quantity
Per linear meter
Quantity
Per roll 50 meter
Description
Finally a good etched-glass film for dry application!
Ideal for cut-out figures and small details that need to adhere to the glass.
XC-1200X EtchedGlass is a light-greyish translucent PVC film with the same characteristics and specifications as the ordinary XC-1200 version, except that the adhesive layer has very small air ducts to allow for easier dry application.
Why AirScape™ air ducts
When cut text or figures are transferred onto glass by means of application tape,
this becomes amazingly easy with XC-1200X.
This means the film can be installed dry without creating air bubbles. Small cut details or letters pose no problem. The micro air ducts become invisible after installation.
technical information:
This film is intended for use with digital printers that use eco-solvent-, hardsolvent, UV- and latex inks. The appearance of the film after printing is remarkable; coloured prints which appear to be etched in to the film and will give the glass a great look. This film stays nice and flat on your printer thanks to its moisture-proof liner.
Interesting:
If fast installation with guaranteed strong adhesion is required, we recommend using SOTT 600-Z0314 Right-On application fluid 600-Z0314. This ensures particularly strong adhesion thanks to the special humidifiers; effective after approx. 3 minutes.
Ideal for cut-out figures and small details that need to adhere to the glass.
- Invisible micro air ducts
- Nice and smooth face film; prints very well.
- Stays fully flat in any printer
- Solvent adhesive
- Roll size:152cm x 50m
XC-1200X EtchedGlass is a light-greyish translucent PVC film with the same characteristics and specifications as the ordinary XC-1200 version, except that the adhesive layer has very small air ducts to allow for easier dry application.
Why AirScape™ air ducts
When cut text or figures are transferred onto glass by means of application tape,
this becomes amazingly easy with XC-1200X.
This means the film can be installed dry without creating air bubbles. Small cut details or letters pose no problem. The micro air ducts become invisible after installation.
technical information:
- Thickness: 70 micron
- Polymeric
- Roll length: 50m
- Roll width: 152cm
- Expected life time: 7 years
- Permanent solvent adhesive
- No adhesive residue after removal
This film is intended for use with digital printers that use eco-solvent-, hardsolvent, UV- and latex inks. The appearance of the film after printing is remarkable; coloured prints which appear to be etched in to the film and will give the glass a great look. This film stays nice and flat on your printer thanks to its moisture-proof liner.
Interesting:
If fast installation with guaranteed strong adhesion is required, we recommend using SOTT 600-Z0314 Right-On application fluid 600-Z0314. This ensures particularly strong adhesion thanks to the special humidifiers; effective after approx. 3 minutes.