Deutsch (Deutschland)
Nederlands (Nederland)
3M® EDGE SEALER 3950 230ml Can
Item No.600-3950
3M® EDGE SEALER 3950 - for sealing the edges of PVC films - 0.23 L can 3M Edge Sealer 3950 is a colourless varnish that provides a water and dirt tight seal between the edge of self-adhesive PVC films and the substrate. It can also prevent curling of the edges. Edge Sealer is resistant to water, mil
Order in larger quantities,
for a better price.
Suggested Retail Price €30.37
Price €28.74
price per Stuk
excl. tax
In stock
Quantity
Per piece
Description
3M® EDGE SEALER 3950
- for sealing the edges of PVC films
3M Edge Sealer 3950 is a colourless varnish that provides a water and dirt tight seal between the edge of self-adhesive PVC films and the substrate. It can also prevent curling of the edges.
Edge Sealer is resistant to water, mild acids and salts. Not resistant to hydraulic oils and greases. Edge Sealer can be removed with isopropanol alcohol and citrus-based cleaners.
How to use:
- for sealing the edges of PVC films
- 0.23 L can
3M Edge Sealer 3950 is a colourless varnish that provides a water and dirt tight seal between the edge of self-adhesive PVC films and the substrate. It can also prevent curling of the edges.Edge Sealer is resistant to water, mild acids and salts. Not resistant to hydraulic oils and greases. Edge Sealer can be removed with isopropanol alcohol and citrus-based cleaners.
How to use:
- Before you begin, test it out to make sure that the Edge Sealer does not affect the substrate.
- Substrate and film should both be degreased and clean.
- Make sure that the film edge is well pressed in accordance with the film manufacturer's guidelines.
- Do not dilute.
- Do not leave the lid off the jar for too long; this will shorten the life of the contents.
- Apply the sealer with a 6mm thin brush in one smooth motion.
- Make a 6-10mm seal edge, covering both the film and the substrate.
- Avoid gaps between different seal edges.
- Allow the seal edge to dry for 24 hours.
3M® EDGE SEALER 3950 230ml Can
Item No.600-3950
3M® EDGE SEALER 3950 - for sealing the edges of PVC films - 0.23 L can 3M Edge Sealer 3950 is a colourless varnish that provides a water and dirt tight seal between the edge of self-adhesive PVC films and the substrate. It can also prevent curling of the edges. Edge Sealer is resistant to water, mil
Suggested Retail Price €30.37
Price €28.74
price per Stuk
excl. tax
Order in larger quantities,
for a better price.
In stock
Quantity
Per piece
Description
3M® EDGE SEALER 3950
- for sealing the edges of PVC films
3M Edge Sealer 3950 is a colourless varnish that provides a water and dirt tight seal between the edge of self-adhesive PVC films and the substrate. It can also prevent curling of the edges.
Edge Sealer is resistant to water, mild acids and salts. Not resistant to hydraulic oils and greases. Edge Sealer can be removed with isopropanol alcohol and citrus-based cleaners.
How to use:
- for sealing the edges of PVC films
- 0.23 L can
3M Edge Sealer 3950 is a colourless varnish that provides a water and dirt tight seal between the edge of self-adhesive PVC films and the substrate. It can also prevent curling of the edges.Edge Sealer is resistant to water, mild acids and salts. Not resistant to hydraulic oils and greases. Edge Sealer can be removed with isopropanol alcohol and citrus-based cleaners.
How to use:
- Before you begin, test it out to make sure that the Edge Sealer does not affect the substrate.
- Substrate and film should both be degreased and clean.
- Make sure that the film edge is well pressed in accordance with the film manufacturer's guidelines.
- Do not dilute.
- Do not leave the lid off the jar for too long; this will shorten the life of the contents.
- Apply the sealer with a 6mm thin brush in one smooth motion.
- Make a 6-10mm seal edge, covering both the film and the substrate.
- Avoid gaps between different seal edges.
- Allow the seal edge to dry for 24 hours.