High-gloss polyurethane with realistic carbon pattern
Cannot be distinguished from real carbon fibre
Scratches disappear; impact and scratch resistant
Hydrophobic
Roll length: 15m

High-gloss polyurethane with realistic carbon pattern indistinguishable from real carbon. Resistant to scratches and impacts.
The CovrGard PPF carbon fibre film is an extremely soft and flexible self-adhesive polyurethane film. The top layer is made of crystal-clear polyurethane with a unique, very high gloss level, which appears as if the carbon pattern has been cast in resin in the bottom layer. During assembly, the protective layer must be removed.
This film is widely used on car roofs, mirrors, bonnets, spoilers and dashboards. Because of its PPF nature, it is applied with moisture, without air channels as with standard wrapping films. The use of a hair dryer to stretch the film is not recommended. The application of this film is similar to other Covrgard PPF films.

---

• Roll width: 152cm
• Lifetime: 10 years
• Thickness: 150 microns
• Highly stretchable and elastic
• Does not stretch with heat
• Do not post-heat (blow dry to death)
• Do not use alcohol and gels in your applicator
• Hydrophobic

---

Our advice:
Thoroughly clean substrate with 600-SC-02 Surface Cleaner. Tar, tectile, oil and grease residues are best removed with 600-T-800 Degreaser. 
Apply with 600-SNG SlideNGlide glide concentrate. Water with baby shampoo can also be used (not Johnson&Johnson).