Perfect CLEANING PREP for the EDGES before installing PPF film

- the best solution for removing stubborn wax and silcon

Durable surfaces such as car paint are often treated with a protective layer. The most conventional way to do this is to use a silicone-based wax. Since silicone has a repellent effect, this is ideal to prevent dirt. However, self-adhesive materials such as stickers, strips and wrap films will also no longer be able to adhere.
To be able to do this, the wax must be removed. SOTT 600-T900 Industrial Silicon & Wax Remover ensures that the wax becomes soft and dissolves, so that it can then be removed with a soft cloth.

How to use:
1. Wash the vehicle or substrate thoroughly so that all the (street) dirt is gone.
2. Make sure the surface to be treated is dry.
3. Apply SOTT 600-T900 Silicone & Wax Remover with the SOTT 300-040 3-layer cleaning paper. This is how you do it: make a wad of paper in your hand and pour SOTT 600-T900 Silicone & Wax Remover on the cleaning paper.
4. Now polish the treatment surface thoroughly and with circular overlapping movements with your cloth. Do this thoroughly and let it soak in for a few minutes.
5. It is possible that the surface will show a white haze. This is normal. This means that the wax becomes soft and begins to dissolve.
6. Now use the SOTT 300-021 UltraClean cloth, also wet it with SOTT 600-T900 Silicone & Wax Remover and polish the surface in circular movements.
7. If the white haze (if visible) disappears during brushing with 600-T900, then the silicone and / or wax has disappeared.
8. Always polish again with a new dry cloth 300-021 or cotton / microfiber cloth.
9. Allow the surface to wash out for 10-20 minutes before you start foil mounting.

T-900 is the perfect product to remove asll types of auto wax, often used on tuning- or high-end car.